Before using this powerful stripping solution across your entire floor, you should pre-test on a small area. Warning: Do not use this stripper undiluted. For normal removal, dilute 1 part 'Easy Lift SC' to 20 parts water using cold water (1 quart per 5 gallons). Mop this solution onto your floor and allow it to sit for 10 minutes. Do not allow the stripper to dry on the floor, reapply if necessary. Use one of our & a to agitate and loosen your finish. Picking up the loosened finish is usually most effective with a , especially one with a front mount squeegee, like our .
For best results and to apply a nice new , we recommend rinsing the surface thoroughly with clean water to ensure the removal of all stripping solution and old wax. Use a neutralizer, like the , to remove the remaining residue after rinsing and return the floor to a neutral pH. Once the floor is completely dry, apply the floor finish in normal manner. For more in-depth instructions, take a look at our .
Directions
- Light Duty Removal: - Dilute 4 oz. per gallon of cold water (1:30 ratio | 1 quart per 7.5 gallons of water).
- Normal Removal: Dilute 6 oz. per gallon of cold water (1:20 ratio | 1 quart per 5 gallons of water).
- Heavy Duty Removal: Dilute 13 oz. per gallon of cold water (1:10 ratio | 1 quart per 2.5 gallons of water).
Warnings
- Please read all cautions and directions before using this product. It contains alkaline ingredients normally found in powerful strippers. Quick penetrating agents and liquefying ingredients require that this product be used according to directions.
- Do not use product on wood, rubber, painted surfaces, asphalt, or asbestos tile.
- Do not use product undiluted.
